浆料制备

泥浆混合和输送系统。

浆料是熔模铸造工艺的关键部分;任何问题都会直接影响制造的外壳的效率和有效性。考虑到这一点,我们的耐磨混合器专为可靠、高效和一致的混合而设计,我们的浆料传输和浆料计量系统为传输和补充提供了方便的解决方案。

动力搅拌机

直接驱动混合器旨在确保均匀、一致的混合。

无论是高剪切、高流量还是对浆液的温和搅拌,都有合适的混合器来满足要求。

直接驱动的多极电机作为标准配备,具有内置的坚固性和可靠的运行,无需减速齿轮箱即可实现各种混合速度。可选的变速控制单元提供更灵活的速度范围。

我们的混合叶轮采用不锈钢、熔模铸造或重型塑料制成,所有设计均以最小功率输入实现最大效率。

主要特点

  • 多种混合模式
  • 重型结构

选项

  • 提供支架和旋转布置
  • 速度和控制选项

Cerramix – 批次

高精度和控制,专为陶瓷基浆料的最佳混合而设计。

批量 Cerramix 移动混合系列由玻璃纤维和低碳钢制成,旨在通过半球形底座和锥形侧面进行高效混合。巧妙的设计便于清洁,并将污染风险降至最低。

由变频驱动单元提供动力以实现精确控制,整个混合过程循环只需按一下按钮即可实现,而旋转支架则可以轻松地升降混合器。该混合器可用于多种工艺——高剪切/分散以及稳定或保持浆料混合。

  • Cerramix

主要特点

  • 双模混频器
  • 安全的搅拌环境
  • 持续过程控制

选项

  • 模拟或数字控制选项
  • 泥浆泵送系统

Cerramix – 连续

连续 Cerramix 系列专为高效混合而设计,将直接驱动动力混合器的性能与我们的 DD 或 HD 浆料罐的内部混合桨相结合。

该系列专为优化混合而设计,混合器和罐体都在旋转。混合系统将HDDD系列浆料罐与 EV 动力混合单元相结合。

由变频驱动单元提供动力以实现精确控制,整个混合过程循环只需按一下按钮即可实现,而旋转支架则可以轻松地升降混合器。混合站可以提供各种控制类型。

主要特点

  • Dual mode mixer
  • Constant process control

选项

  • 类型 1 或类型 2 控制
  • HD或DD泥浆罐
  • 磁性盖
  • 磁性盖
  • 油箱内衬和边缘盖

控件

DIRECT ON LINE (DOL): fixed speed control for simple start and stop of the mixing system.

TYPE 1 CONTROL: a variable frequency drive allows analogue control of acceleration, deceleration and mixer speed via a potentiometer located on the front of the panel. A safety lock prevents rotation of the propeller unless the mixer is in a lowered position.

TYPE 2 CONTROL: a variable frequency drive allows programmable digital control of acceleration, deceleration and mixer. The type 2 control system allows the mixer to change between 2 pre-set values, allowing a sawtooth profile of the speeds. Features include simple on/off operation and programmable timed cycles. An auto mode sequence enables controlled mixing sequences, and a safety lock prevents rotation of the propeller unless the mixer is in a lowered position.

All of our control panels are contained in an enclosed cabinet that can be freestanding or attached to the mixer frame or wall. Designed for durability, they feature a pressed mild steel frame, incorporating rubber-protected splash-resistant application buttons, heavy duty ABS variation dials and long life LED indicator lights.

主要特点

  • 双模混频器
  • 持续过程控制
  • Mixer control

Slurry transfer pump system

Our slurry transfer pump system offers a convenient method of transferring slurry from the mix station to the in-cell slurry tank.

The system is mounted on a trolley unit that carries the slurry pump, pneumatic controls, and a slurry flushing tank. The trolley is simply moved to the work area, where one end of the delivery hose is placed into the receiving tank, and the other end placed into the mixing tank. The pump provides clean and easy transfer of slurry. In addition, an on-board tank conveniently carried on the trolley allows the pump and delivery hose to be flushed through.

主要特点

  • High flow rate
  • Improved shellroom cleanliness
  • Improved worker environment

Slurry dosing system

Our slurry dosing system provides an efficient solution for the replenishing of slurry tanks with a consistent amount of liquid material.

The material silo can be conveniently filled at floor level and then lifted into position on the support stand, or alternatively, a sand elevator can be utilised to replenish the material silo from floor level.
Binder is held in stainless steel or plastic containers either attached directly to the slurry tank or supported on a separate structure. The liquid is pumped to the slurry tank utilising an integrated metering pump unit. Various control options are available for fully process integrated systems.

主要特点

  • Self-contained
  • Consistent discharge rate
  • Variable discharge timer
  • Viewing window

© Copyright - VA Technology 2021